Cảm biến quang Panasonic PM-R65

Cảm biến quang Panasonic PM-R65

1. Giới thiệu

2. Mô tả

Item	Specifications
Product Number	PM-R65
Part Number	PM-R65
CE marking directives	EMC Directive, RoHS Directive
Sensing range	6 mm 0.236 in (fixed)
Minimum sensing object	0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis	0.05 mm 0.002 in or less
Repeatability	0.01 mm 0.0004 in or less
Supply voltage	5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption	15 mA or less
Output	NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation	Incorporated with 2 outputs: Light-ON / Dark-ON
Output:Short-circuit protection	Incorporated
Response time	Under light received condition: 20 μs or less Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) (Note) The response frequency is the value when the disc, given in the figure below, is rotated.
Operation indicator	Orange LED (lights up under light received condition)
Pollution degree	3
Protection	IP40 (IEC)
Ambient temperature	-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉
Ambient humidity	5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance	Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Shock resistance	15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material	Enclosure: PBT Display section: Polycarbonate
Cable length	Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
Weight	Net weight: 3 g approx. Gross weight: 3 g approx.
Remark	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

3. Các điều khoản thanh toán

Thanh toán đối với hàng có sẵn trong kho: thanh toán 100% ngay sau khi giao hàng bằng tiền mặt, hoặc trước khi giao hàng bằng chuyển khoản.

Thanh toán đối với hàng đặt:

Đợt 1: Thanh toán 50% tổng giá chị đơn hàng khi xác nhận đặt hàng.

Đợt 2: Thanh toán 50% giá trị đơn hàng ngay khi giao hàng bằng tiền mặt hoặc nhận được thông báo hàng đã về kho bên bán bằng chuyển khoản.
Công nợ: vui lòng liên hệ trực tiếp để được tư vấn.

Tất cả thiết bị do bien-tan-servo-plc.com bán ra đều có hóa đơn GTGT (VAT 10%)

4. Thông tin liên hệ

Công Ty TNHH Kỹ Thuật Thiết Bị Điện Số 1
Địa chỉ: 141/50E, Đường 28, P.6, Q.Gò Vấp, TP.Hồ Chí Minh
Số điện thoại: 0903 945 366 (zalo) – Mr. Đức
Email: sales06@thietbidienso1.com